Rakiro Biotech Sys Pvt Ltd
Rakiro Biotech Sys Pvt Ltd
Navi Mumbai, Maharashtra
Send SMS
Send E-mail

Multiparameter Water Testing Kit

The Aquasol Multiparameter Water Testing Kit is available in one single pack for multiple parameters therefore in one single pack various parameters can be analyzed increasing the convenience and Portability. These are ready to use test kits foron fieldanalysis of water.

Get CALLBACK

Swimming Pool Test Kit

Swimming Pool Test Kit
 
Ask For Price

Swimming pool water is a carrier of harmful bacteria. Hence, microbiological quality is the most important parameter for the safety of swimming pool water. Therefore there is broad consent that disinfection of pool water is indispensable. Concentration of free chlorine in swimming pool water is necessary to achieve this goal.

Specifications:

ParameterRange
Free Chlorine0.1, 2.0 mg /l as Chlorine
pH4 to 10
Yes! I am interested
Get CALLBACK

Boiler Water Test Kit

Boiler Water Test Kit
 
Ask For Price

Boilers are systems which generate steam, which consists of two principal parts: the furnace, which provides heat, usually by burning a fuel, and the Boiler proper, a device in which the heat changes water into steam. The steam or hot fluid is then recirculated out of the boiler for use in various processes for heating applications.
Proper pre-treatment of Boiler feed water is an important part of operating and maintaining a boiler system. As steam is produced, dissolved solids become concentrated and form deposits inside the boiler. This leads to poor heat transfer and reduces the efficiency of the boiler. Dissolved gasses such as oxygen and carbon dioxide will react with the metals in the boiler system and lead to boiler corrosion. In order to protect the boiler from these contaminants, they should be eliminated or at least through external or internal treatment.

Specifications:
ParameterRange
Total Hardness2-40, 5-100, 25-500 mg/l as CaCO3
Calcium Hardness5–100 mg/l as CaCO3
Alkalinity10-200 & 100-2000 mg/l as CaCO3
Chloride10–200 & 50–1000 mg/l as Chloride
pH4 to 10
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Silica5, 10, 20, 40, 60,80 mg/l as SiO2
Orthophosphate0, 5,10, 20, 30, 40 mg/l as PO4
Sulphite5-100 mg/l as Na2SO3
Yes! I am interested
Get CALLBACK

Cooling Water Test Kit

Cooling Water Test Kit
 
Ask For Price

Water is required to be cooled for many processes, for example air conditioners, manufacturing processes or power generation, etc. A cooling tower is used to reduce the temperature of a water stream by extracting heat from water and emitting it to the atmosphere. Cooling towers make use of evaporation whereby some of the water is evaporated into a moving air stream and subsequently discharged into the atmosphere. As a result, the remainder of the water is cooled down significantly. Water by its basic nature is corrosive. Therefore cooling systems are plagued with corrosion.
Many factors affect corrosion rates in a given cooling water system. The presence of dissolved gases, chloride and sulfate levels, pH, alkalinity, scaling tendency, and protective ions such as calcium, magnesium, phosphate nitrate, and silicate must all be taken into consideration. The first step to control is detection therefore regular monitoring of the above is absolutely essential.

Specifications:
ParameterRange
Total Hardness2–40, 5–100, 25–500 mg/l as CaCO3
Calcium Hardness5–100 mg/l as CaCO3
Alkalinity10– 200 & 100–2000 mg/l as CaCO3
Chloride10–200 & 50–1000 mg/l as Chloride
pH4 to 10
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Silica5, 10, 20, 40, 60, 80 mg/l as SiO2
Orthophosphate0, 5, 10, 20, 30, 40 mg/l as PO4
Free Chlorine0.1-2.0 mg/l as Chlorine
Yes! I am interested
Get CALLBACK

Drinking Water Test Kit

Drinking Water Test Kit
 
Ask For Price

Drinking water is supposed to be safe for consumption by humans and animals. Water may be naturally safe, or it may need to be treated in order to be safe. Water which is not safe to drink can carry diseases and heavy metals.

Specifications:
ParameterRange
pH4 to 10
Alkalinity10-200 & 100-2000 mg/l as CaCO3
Total Hardness2-40, 5-100 mg/l as CaCO3
Fluoride0.2–2.0, 0.5–5.0 mg/l as Fluoride
Nitrate1.0, 2.5, 5, 7.5, 10, 20, 30, 40, 50 mg/l as NO3
Chloride10–200 & 50–1000 mg/l as Chloride
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Free Chlorine (DPD)0.1-2.0 mg/l as Chlorine
Turbidity1, 5,10, 25 as NTU
Yes! I am interested
Get CALLBACK

RO Water Test Kit

RO Water Test Kit
 
Ask For Price

Reverse Osmosis (RO) is a modern process to purify water for a wide range of applications, including semiconductors, boiler feed water treatment, food processing, biotechnology, pharmaceuticals, power generation, seawater desalting,

Specifications:
ParameterRange
pH4 to 10
Total Hardness2-40, 5-100, 25-500 mg mg/l as CaCO3
Calcium Hardness5-100 mg/l as CaCO3
Silica5, 10, 20, 40, 60, 80 mg/l as SiO2
Sulphate5–100, 50–1000 mg/l as Sulphate
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Nitrate1.0, 2.5, 5, 7.5, 10, 20, 30, 40, 50 mg/l as NO3
Nitrite(Low Level)0.04-0.8 mg/l as NO2
Yes! I am interested
Get CALLBACK

Purified Water Test Kit

Purified Water Test Kit
 
Ask For Price

Highly purified water is an essential component of biopharmaceutical industry. It is used as an ingredient in both research procedures and drug formulations and also for general cleaning, rinsing, etc. In each case the water source must be processed and treated to microbial and chemical contaminants that would otherwise compromise the quality, safety, efficacy and purity of finished product.

Specifications:
ParameterRange
Acidity10-200 & 100-2000 mg/l as CaCO3
Alkalinity10-200, 100-2000 mg/l as CaCO3
pH4 to 10
Calcium, Magnesium5-100 mg/l as CaCO3
Ammonium0.5, 1.0, 2.0, 4.0, 6.0, 8.0 mg/l as NH4
Sulphate5-100, 50-1000 mg/l as Sulphate
Chloride10-200, 50-1000 mg/l as chloride
Yes! I am interested
Get CALLBACK

Metal Working Fluid Test Kit

Metal Working Fluid Test Kit
 
Ask For Price

Water is the major ingredient in a water soluble metalworking fluid mix. It may amount to as much as 90-99% of the mix as used. Therefore, its importance in product performance can not be ignored. Corrosion, residue, scum, rancidity, foam, excess concentrate usage, or almost any metalworking fluid performance problem can be caused by the quality of the water used in making the mix. Untreated water always contains impurities. Some impurities affect drastically by reacting or combining with metalworking fluid ingredients. These impurities can change performance characteristics. Therefore, water treatment is necessary to obtain the full benefits of water soluble metalworking fluids.

Specifications:
ParameterRange
Total Hardness2-40, 5-100 mg/l as CaCO3
Chloride10-200 & 50-1000 mg/l as Chloride
pH4-10
Yes! I am interested
Get CALLBACK

Well Water Testing Kit

Well Water Testing Kit
 
Ask For Price

Well water is supposed to be safe for consumption by humans and animals. Water may be naturally safe, or it may need to be treated in order to be safe. Water which is not safe to drink can carry diseases and heavy metals.

Specifications:
ParameterRange
pH4 to 10
Alkalinity10-200 & 100-2000 mg/l as CaCO3
Total Hardness2-40, 5-100 mg/l as CaCO3
Fluoride0.2–2.0, 0.5–5.0 mg/l as Fluoride
Nitrate1.0, 2.5, 5, 7.5, 10, 20, 30, 40, 50 mg/l as NO3
Chloride10–200 & 50–1000 mg/l as Chloride
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Free Chlorine (DPD)0.1-2.0 mg/l as Chlorine
Turbidity1, 5,10, 25 as NTU
Yes! I am interested
Get CALLBACK

Boiler Monitoring Test Kit

Boiler Monitoring Test Kit
 
Ask For Price

Boilers are systems which generate steam, which consists of two principal parts: the furnace, which provides heat, usually by burning a fuel, and the Boiler proper, a device in which the heat changes water into steam. The steam or hot fluid is then recirculated out of the boiler for use in various processes for heating applications.
Proper pre-treatment of Boiler feed water is an important part of operating and maintaining a boiler system. As steam is produced, dissolved solids become concentrated and form deposits inside the boiler. This leads to poor heat transfer and reduces the efficiency of the boiler. Dissolved gasses such as oxygen and carbon dioxide will react with the metals in the boiler system and lead to boiler corrosion. In order to protect the boiler from these contaminants, they should be eliminated or at least through external or internal treatment.
Yes! I am interested
Get CALLBACK

Cooling Tower Water Test Kit

Cooling Tower Water Test Kit
 
Ask For Price

Water is required to be cooled for many processes, for example air conditioners, manufacturing processes or power generation, etc. A cooling tower is used to reduce the temperature of a water stream by extracting heat from water and emitting it to the atmosphere. Cooling towers make use of evaporation whereby some of the water is evaporated into a moving air stream and subsequently discharged into the atmosphere. As a result, the remainder of the water is cooled down significantly. Water by its basic nature is corrosive. Therefore cooling systems are plagued with corrosion.
Many factors affect corrosion rates in a given cooling water system. The presence of dissolved gases, chloride and sulfate levels, pH, alkalinity, scaling tendency, and protective ions such as calcium, magnesium, phosphate nitrate, and silicate must all be taken into consideration. The first step to control is detection therefore regular monitoring of the above is absolutely essential.

Specifications:
ParameterRange
Total Hardness2–40, 5–100, 25–500 mg/l as CaCO3
Calcium Hardness5–100 mg/l as CaCO3
Alkalinity10– 200 & 100–2000 mg/l as CaCO3
Chloride10–200 & 50–1000 mg/l as Chloride
pH4 to 10
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Silica5, 10, 20, 40, 60, 80 mg/l as SiO2
Orthophosphate0, 5, 10, 20, 30, 40 mg/l as PO4
Free Chlorine0.1-2.0 mg/l as Chlorine
Yes! I am interested
Get CALLBACK

Purifier Water Test Kit

Purifier Water Test Kit
 
Ask For Price

Drinking water is supposed to be safe for consumption by humans and animals. Water may be naturally safe, or it may need to be treated in order to be safe. Water which is not safe to drink can carry diseases and heavy metals.

Specifications:
ParameterRange
pH4 to 10
Alkalinity10-200 & 100-2000 mg/l as CaCO3
Total Hardness2-40, 5-100 mg/l as CaCO3
Fluoride0.2–2.0, 0.5–5.0 mg/l as Fluoride
Nitrate1.0, 2.5, 5, 7.5, 10, 20, 30, 40, 50 mg/l as NO3
Chloride10–200 & 50–1000 mg/l as Chloride
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Free Chlorine (DPD)0.1-2.0 mg/l as Chlorine
Turbidity1, 5,10, 25 as NTU
Yes! I am interested
Get CALLBACK

Filter Water Test Kit

Filter Water Test Kit
 
Ask For Price

Drinking water is supposed to be safe for consumption by humans and animals. Water may be naturally safe, or it may need to be treated in order to be safe. Water which is not safe to drink can carry diseases and heavy metals.

Specifications:
ParameterRange
pH4 to 10
Alkalinity10-200 & 100-2000 mg/l as CaCO3
Total Hardness2-40, 5-100 mg/l as CaCO3
Fluoride0.2–2.0, 0.5–5.0 mg/l as Fluoride
Nitrate1.0, 2.5, 5, 7.5, 10, 20, 30, 40, 50 mg/l as NO3
Chloride10–200 & 50–1000 mg/l as Chloride
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Free Chlorine (DPD)0.1-2.0 mg/l as Chlorine
Turbidity1, 5,10, 25 as NTU
Yes! I am interested
Get CALLBACK

RO Plant Test Kit

RO Plant Test Kit
 
Ask For Price

Reverse Osmosis (RO) is a modern process to purify water for a wide range of applications, including semiconductors, boiler feed water treatment, food processing, biotechnology, pharmaceuticals, power generation, seawater desalting,

Specifications:
ParameterRange
pH4 to 10
Total Hardness2-40, 5-100, 25-500 mg mg/l as CaCO3
Calcium Hardness5-100 mg/l as CaCO3
Silica5, 10, 20, 40, 60, 80 mg/l as SiO2
Sulphate5–100, 50–1000 mg/l as Sulphate
Iron (Low Level)0.05, 0.1, 0.3, 0.4, 0.7, 1.0, 1.5, 2.0 mg/l as Fe
Nitrate1.0, 2.5, 5, 7.5, 10, 20, 30, 40, 50 mg/l as NO3
Nitrite(Low Level)0.04-0.8 mg/l as NO2
Yes! I am interested
Get CALLBACK

Pool Test Kit

Pool Test Kit
 
Get Best Quote
Approx Price: Rs 1,300 / 1 Kit

Swimming pool water is a carrier of harmful bacteria. Hence, microbiological quality is the most important parameter for the safety of swimming pool water. Therefore there is broad consent that disinfection of pool water is indispensable. Concentration of free chlorine in swimming pool water is necessary to achieve this goal.

Specifications:

ParameterRange
Free Chlorine0.1, 2.0 mg /l as Chlorine
pH4 to 10


Additional Information:
  • Minimum Order Quantity: 1 1 Kit
Yes! I am interested
Get CALLBACK

Pharmaceutical Water Test Kit

Pharmaceutical Water Test Kit
 
Ask For Price

Highly purified water is an essential component of biopharmaceutical industry. It is used as an ingredient in both research procedures and drug formulations and also for general cleaning, rinsing, etc. In each case the water source must be processed and treated to microbial and chemical contaminants that would otherwise compromise the quality, safety, efficacy and purity of finished product.

Specifications:
ParameterRange
Acidity10-200 & 100-2000 mg/l as CaCO3
Alkalinity10-200, 100-2000 mg/l as CaCO3
pH4 to 10
Calcium, Magnesium5-100 mg/l as CaCO3
Ammonium0.5, 1.0, 2.0, 4.0, 6.0, 8.0 mg/l as NH4
Sulphate5-100, 50-1000 mg/l as Sulphate
Chloride10-200, 50-1000 mg/l as chloride
Yes! I am interested
X
Looking for “Multiparameter Water Testing Kit”?
Find Us Ujwala J. (Sales Coordinator) R-466, TTC Industrial Area, MIDC, Rabale, Navi Mumbai - 400701, Maharashtra, India
SEND SMS
SEND E-MAIL